7 Best Cordless Saw | 7 Cordless Saws That Actually Hold Up

Check Price on Amazon

A budget-friendly circular saw that cuts like butter and includes two batteries

Most value-priced cordless saws cut corners on battery life or build quality, but this DEKOPRO kit delivers a surprisingly solid experience at a price that leaves room in your tool budget. The 6-1/2-inch carbide-tipped blade spins at 4,500 RPM, and one reviewer says it “cuts through wood like butter and the laser is a big help keep your cut straight.” Unlike many saws in this range, it arrives with two 4.0Ah batteries and a charger, so you can keep one charging while you keep cutting. The adjustable bevel goes from 0 to 45 degrees, and the laser guide gives you a visible line for straight rip cuts.

Where this saw differs from the more expensive CRAFTSMAN (which delivers a 56-degree bevel with positive stops at 22.5 and 45 degrees), the DEKOPRO maxes out at 45 degrees—fine for most DIY bevel cuts on decking or trim. The items are heavy at 4.29 kilograms (about 9.46 pounds), so it is not the most portable option in this list. Owners mention two quirks: the laser is too dim to use outdoors in direct sunlight, and the manual has an error about which direction to loosen the blade. That second issue is minor once you have changed a blade before, but it might confuse a first-time owner.

The electric brake stops the blade quickly when you release the trigger—a safety feature usually found on pricier models. If you are tackling your first framing project or want a second saw for rough cuts without spending premium money, this kit is tough to beat on sheer value. It also comes with a carry bag, which keeps everything organized in the truck.

Check Price on Amazon

A cordless saw that rips through lumber like a lightsaber

This is the saw you grab when you need to turn a stack of 2x4s into a deck frame and do not want to hunt for a generator. The brushless motor delivers up to 75% more power than a brushed equivalent, according to the manufacturer, and the 56-degree bevel capacity (with positive stops at 22.5 and 45 degrees) gives you more angled cutting range than the DEKOPRO’s 45 degrees—a 25% greater range in practice. The blade length is 7.25 inches, which is 0.75 inches longer than the DEWALT DCS566’s 6.5-inch blade, so you get a deeper cut in one pass. One reviewer describes it as a “lightsaber through wood” and says it completely replaced their old corded saw.

The trade-off is real: battery drain. One verified buyer reports “10 minutes of actual cutting on a triple-sized battery for three 8-foot cuts of 1-inch lumber”—that is not a typo. This saw has huge torque, but it chews through amp-hours fast, and the battery gets hot. For occasional use on a job site where you have multiple 5.0Ah or 6.0Ah packs ready to swap, it is a powerful beast. For a single battery on a weekend project, you may run out before you finish. The included LED light illuminates the cut line, and the upper metal guard adds durability if you drop it.

The rigid aluminum baseplate is thick and precise, especially when used with a guide. One reviewer noted that the brushless motor stalls under pinching loads on large sheets—manage the support on a long rip cut and you will avoid the issue entirely. It is a bare tool (no battery or charger), which keeps the buy-in lower if you already own Craftsman V20 batteries.

Check Price on Amazon

The pocket-sized saw that outperforms pricier rivals

When your cutting needs are more precision than demolition, this mini circular saw from WORKPRO becomes the most versatile tool in the box. It weighs just 4.36 pounds—less than half of what the CRAFTSMAN weighs at 9.3 pounds (a 53% difference)—and the compact size means you can make cuts in tight spaces where a full-size saw simply will not fit. Maximum depth cuts 1-11/16 inches at 90 degrees and 1-1/8 inches at 45 degrees, which is enough for flooring, plywood, and thin lumber. The kit includes three blades: a 24-tooth alloy blade for wood, a 60-tooth blade for wood and plastic, and a diamond blade for tiles, so you can switch materials without a store trip.

Customers note the saw is “excellent for cutting boards and small trees; cuts through branches easily” and mention the battery lasts several hours per charge across multiple days. The included 4.0Ah battery and 2.4A fast charger (full charge in about 2 hours) mean you are rarely waiting around. The laser guide and the parallel guide help with straight cuts, though like most laser guides, it washes out in direct sunlight. The rubberized grip makes one-handed operation easy, and the locking switch prevents accidental startups during storage.

Compared to the Craftsman CMCS551B above, which is a brute-force 7-1/4-inch ripper built for framing, the WORKPRO is a surgical tool for trimming, remodeling, and cutting materials that range from PVC to stucco. One reviewer used it to get through stucco without any trouble. The dust extraction tube connects to a vacuum for a cleaner indoor work area—a detail you rarely see on compact saws. If you are a flooring contractor or a DIYer who mostly works with sheet goods, this is a better fit than a heavy full-size saw.

Check Price on Amazon

the just-right circular saw that fits between compact and full-size

You do not always need the brute power of a 7-1/4-inch saw, but a 4-1/2-inch mini sometimes leaves you wishing for more reach. That is the gap this DEWALT DCS566 fills perfectly. One buyer sums it up simply: “great saw. I use it all the time and the price was good, it works great, it cuts very fast, the battery lasts a long time if you use a 5ah battery.” The barrel-grip handle (a second grip on top) gives you two-handed control for vertical cuts, which helps with precision on long sheets.

At 3.54 kilograms (about 7.8 pounds), it is noticeably heavier than the WORKPRO mini but lighter than the 12-pound SKIL. The blade brake stops the spin almost immediately when you release the trigger, a standard safety feature on modern Dewalt saws. Build quality is what you expect from the yellow brand—the shoe feels solid, the height adjustment is tool-free, and the blade guard does not bind. One caveat: this is a bare tool (battery sold separately), and reviewers emphasize that pairing it with a 5.0Ah battery makes a dramatic difference in cut speed and runtime compared to a smaller 2.0Ah pack.

Where this saw falls short of the Craftsman CMCS551B is in raw rip capacity—the 7-1/4-inch Craftsman can cut deeper in one pass and has slightly more torque for thick hardwoods. But the DCS566 is more maneuverable and pairs naturally with the Dewalt 20V ecosystem if you already own a Dewalt drill or impact driver. It is the saw you reach for on a remodel where you are cutting everything from 1-inch ply to pressure-treated 2x4s.

Check Price on Amazon

A 5300 RPM beast that cuts 3x deeper than most in one pass

This is the saw to grab when you have a pile of 2x6s, 2x8s, or even 4x4s to cut and you want to get it done in single passes. The digital brushless motor spins the 7-1/4-inch blade at up to 5,300 RPM—significantly faster than the 4,500 RPM of the DEKOPRO or WORKPRO saws—and the depth of cut reaches 2-5/8 inches. According to the manufacturer, it can make 350 cuts in 2×4 pine on a single 5.0Ah battery (sold separately). The included kit comes with a 4.0Ah lithium battery and a quick charger, so you can start cutting right away. The build uses cast aluminum for the guards and shoe, which holds alignment better than stamped steel over years of use.

Reviewers point out that it is “lightweight, well-balanced, powerful brushless saw” and that “it handled a true 2 x 6 piece of white oak much better than I expected it to.” The electric brake stops the blade quickly for safety, and the 56-degree bevel capacity matches the Craftsman’s, with easy angle and depth adjustments that do not require tools. At 12 pounds, it is the heaviest saw in this roundup (the Craftsman is 9.3 lbs and the WORKPRO mini is just 4.36 lbs), so you feel the weight on overhead cuts or extended use. One buyer realistically advises that a professional should carry a second battery, reporting that the 4.0Ah pack lasts about 3 hours with regular use.

This SKIL kit sits at a higher price tier than the Craftsman bare tool, but you are paying for the included battery, charger, carry bag, and the faster 5,300 RPM motor. If you are replacing a corded circular saw and want a battery-powered unit that does not feel like a compromise on speed, this is the one. The 2-5/8-inch depth of cut means you can rip a 4×4 post in one pass without flipping it, which saves time on fence and deck projects.

Check Price on Amazon

The gas-alternative chainsaw that made one owner ditch his 18-inch saws

If you are tired of gummed-up carburetors and yanking a starter cord 30 times, this Greenworks chainsaw is a genuine replacement for a gas saw in the 8-10 inch limb range. It runs on a 40-volt 2.0Ah battery and the manufacturer claims 50 cuts in 4×4 treated wood on a single charge. The 12-inch low-recoil bar handles storm cleanup and pruning up to about 10 inches diameter, and one reviewer says it made “quick work of limbs up to 7″ in diameter and never struggled.” Shoppers say that it is “nice and light and good for small odd angle spaces or high up on a ladder” compared to big gas saws. The included charger can also power phones and iPads, functioning as a portable power bank—a clever dual-use feature for camping or emergencies.

Safety is clearly thought through here: a dual-start system requires you to push a lock button and squeeze the trigger simultaneously, preventing accidental startups. The tool-free chain tensioner lets you adjust the chain without any extra tool, and the auto-oiler keeps the bar lubricated during use to extend chain life. One important design note from a reviewer: it does not have a top-mounted chain brake (it uses a thumb button on the side instead), so use it with awareness, especially on the first few cuts.

Light duty is the key phrase here. This is not a saw for felling 20-inch trees or bucking firewood all weekend. The 0.73 horsepower motor is adequate for green wood and limbs, but it will struggle on hard, dry wood. The 10.9-pound weight is reasonable for a 12-inch bar saw, and the carry case makes storage and transport clean. The battery platform also works with the full range of Greenworks 40V outdoor tools, so if you expand into a string trimmer or leaf blower later, your batteries stay compatible.