13 Best AC Heat Pump Units | Stay Cool Without The Noise

Check Price on Amazon

The Goodman GLZS4BA3610 heat pump paired with the AMST36CU1300 air handler delivers 36,000 BTU of cooling and heating in a true multi-position design, meaning you can orient the air handler vertically, horizontally, or counterflow depending on your closet or attic space. At 15 SEER2 and using R-32 refrigerant — which has a significantly lower global warming potential than R-410A — this system offers a future-proof efficiency level without the premium price tag of a ductless mini split. The rotary scroll compressor is built for long-term reliability across tens of thousands of cycles.

Multiple real owners in Arizona and Florida reported month-over-month electric bill reductions of or more after replacing older 10-12 SEER units with this Goodman system. The single-stage compressor is not variable-speed, so you will see minor temperature swings versus an inverter mini split, but for a whole-home forced-air setup, the performance consistency is excellent. One buyer noted the valve takeoffs on the condenser are tight for brazing — a professional installer should handle this without issue.

This is the right choice if you need to replace an existing central split system and want a reputable brand with mainstream parts availability. The 10-year compressor warranty and 5-year parts warranty add long-term peace of mind. Just note that accessories like the line set, thermostat, and any LP conversion kit are sold separately, and the system requires a licensed HVAC professional for installation.

Check Price on Amazon

The Senville AURA Series 24,000 BTU mini split delivers a 21.5 SEER rating that puts it in the top tier of ductless efficiency for the price. The DC inverter compressor modulates from roughly 20 percent to full capacity, holding a 68°F setpoint in a 1,250-square-foot living area while drawing only 3 to 4 amps per leg at 240V. That’s roughly half the current draw of a traditional window unit of similar capacity. The system is UL Listed and AHRI Certified, and it works with Alexa for voice-based temperature adjustments.

Real owners consistently describe the indoor unit as “extremely quiet” and “almost silent” at lower fan speeds. Several reviews note that the included 16-foot line set works well for most installations but recommend buying a longer line set if your condenser placement is more than 12 feet from the wall-mounted air handler. One experienced HVAC installer mentioned that the white indoor unit is large — 39 inches wide — so measure your wall space before mounting. The annual energy consumption is listed at 3,973 kWh, which translates to roughly to per month in most climates.

The Senville AURA is ideal for a large master suite, open-plan living room, or a commercial space like a small restaurant dining area. It doesn’t come with a dedicated Senville app — smart control is handled through Alexa — so if you want a standalone app, consider a unit like the COSTWAY Airtural instead. The unit can operate in heating mode down to -22°F, making it viable for cold climates as long as the outdoor unit is protected from heavy snow.

Check Price on Amazon

The COSTWAY Airtural Series 24,000 BTU mini split is Energy Star Most Efficient 2024 certified, with a 21 SEER2 and 10 HSPF2 rating that puts it among the most efficient ductless units you can buy without stepping into the ultra-premium tier. It uses R-32 refrigerant with a GWP of 675 — roughly one-third the global warming potential of R-410A — and features a self-cleaning function that heats the indoor coil to 135°F to kill mold and bacteria, which is a tangible advantage in humid climates.

Real owners report rapid cooling in spaces up to 1,500 square feet, with one user noting the unit dropped a 20’x40’x12′ bedroom to 69°F and held it there during 100°F outdoor conditions. The outdoor unit is described as near-silent, and the 4D auto swing distributes airflow evenly. However, some users found the remote timer instructions unclear, and the app — AC Freedom — requires a 2.4 GHz Wi-Fi network, a common limitation among budget-friendly smart mini splits. One negative review reported a defrost issue on a 3-ton multi-head system, though the single-zone 24,000 BTU model has far fewer reported defects.

This unit is best for someone who wants Energy Star efficiency and eco-friendly R-32 refrigerant at a mid-range price point without the premium of a brand like Daikin. The 5-year parts and 8-year compressor warranty provide solid coverage. Professional installation is strongly recommended; the included 13-foot copper line set is pre-flared and insulated, but cutting and flaring requires HVAC experience.

Check Price on Amazon

The DELLA Vario Series 18,000 BTU mini split packs a 21 SEER2 rating and full Alexa compatibility into a compact unit designed for spaces up to 1,000 square feet. The standout feature is the I Feel mode — the remote control houses a temperature sensor that tells the indoor unit to condition the air around the remote rather than at the wall-mounted unit itself. This is genuinely useful for nurseries, home offices, or any room where the thermostat location doesn’t match where you actually sit.

Real owners are overwhelmingly positive, with multiple reviews mentioning the unit is “so quiet you can’t even hear it running” at 32 dBA in low fan mode. One Tucson, Arizona owner reported that an 18,000 BTU unit “effectively cools a 200 ft² hot room to low 70s during the day and 60s at night” with the outdoor temperature exceeding 110°F. Another user installed two 18K units in an 1,800-square-foot double-wide mobile home and reported a monthly reduction in their electric bill compared to window units and radiant heaters.

The system includes a full installation kit with 16.4-foot pre-flared copper lines, but the line set uses hard copper that must be annealed before flaring if you need to shorten it. Several buyers recommended having a professional handle the flare connections and vacuum pull. The heating function works down to -4°F, so this unit can serve as a primary heat source in mild-winter climates or as supplemental heat in colder regions.

Check Price on Amazon

Daikin is one of the few manufacturers that designs and manufactures its own compressors, and the Entra series benefits from that vertical integration. The 18,000 BTU unit features a rotary scroll DC inverter compressor with an 18 SEER2, 9 HSPF2, and 10.5 EER2 — a balanced efficiency profile that delivers strong performance across both cooling and heating without peaking in one mode at the expense of the other. The unit covers up to 1,000 square feet and operates in cooling mode from 50°F to 115°F ambient and heating down to 5°F.

The Titanium Apatite Photocatalytic Air Purifying Filter is the differentiator here — it uses UV light to break down airborne bacteria and viruses while the titanium apatite coating captures and neutralizes allergens. This is a genuine air quality upgrade, not a marketing gimmick, and it matters if you or your family suffer from allergies or respiratory sensitivities. Real owners describe the unit as “cooling quickly and efficiently” and “keeping a consistent temperature” after professional installation.

The Entra system includes a 15-foot Maxwell line set and wall-mounting bracket, but the control is via infrared remote only — there is no Wi-Fi or app control included. If you want smart connectivity, you’ll need to buy a separate adapter. The 5-star BEE rating indicates high efficiency, but at this price point, the lack of built-in Wi-Fi feels like an oversight. This unit is best for buyers who prioritize air purification and brand reliability over app-based convenience.

Check Price on Amazon

Cooper & Hunter’s MIA Series 24,000 BTU mini split hits an 18.7 SEER2 rating and includes a Smart Kit that enables full remote control via smartphone app, scheduling, and temperature adjustments from anywhere. The unit covers up to 1,500 square feet and uses an inverter compressor that delivers “near silent” operation according to multiple real owners. One Phoenix review noted the unit “cools 1,500+ sq ft in 110°F weather” and reduced the user’s electric bill by per month compared to their previous system.

The build quality is a step above the budget-tier units — the indoor unit feels solid, the remote has a clear backlit display, and the included 16-foot line set is pre-flared and insulated. Owners with DIY experience found the installation straightforward with a vacuum pump and flaring tool, but the manufacturer explicitly states this is not a DIY system. One negative review reported an evaporator coil failure after two years and three months, and the warranty was denied because the installer didn’t register the unit — a cautionary tale about following the registration process.

This is the right pick if you want a mid-priced 24,000 BTU unit with reliable smart home integration and a U.S.-based technical support team. It works with both the C&H Remote app and voice control through Alexa. The 5°F minimum heating temperature limits its use in extremely cold climates, but for most of the southern and central United States, it performs well as a primary or supplementary heat source.

Check Price on Amazon

The Cooper & Hunter Olivia Series dual-zone system pairs an 18,000 BTU outdoor condenser with two indoor air handlers — one 9,000 BTU and one 12,000 BTU — to independently control two separate rooms or zones. At 22.5 SEER, this is one of the most efficient multi-zone setups available, and each indoor unit comes with a smart port adapter that allows independent control through the C&H Remote app. The outdoor unit is UL Listed and AHRI Certified and can heat down to -13°F, giving it real cold-climate capability.

Real owners have used this system in a variety of configurations. One aerospace engineer and DIYer installed the 18K dual-zone system in a 2,600-square-foot house and reported an monthly electric bill reduction after replacing a portion of a 36K traditional system. Another owner put dual 12K heads in a single-wide trailer and described the cooling as “blows ice cold” and the heating as “hot on heat.” The follow-me mode on the remotes allows each zone to be conditioned based on the temperature at the remote, not the indoor unit.

The trade-off is installation complexity — multi-zone systems require more refrigerant line routing, and the 1/2-inch copper linesets are less flexible than smaller diameters. At least one owner noted that the included instructions are lacking and that basic HVAC knowledge is required. The system ships via freight, and the carrier will contact you to schedule delivery. This unit is best for anyone who needs to condition two separate rooms — like a bedroom and a living room or a home office and a garage — with a single outdoor condenser.

Check Price on Amazon

The MRCOOL 5th Generation DIY 24,000 BTU mini split is the only unit in this list explicitly designed for homeowner installation without a vacuum pump or flaring tools. The key is the pre-charged 25-foot Quick Connect line set — the refrigerant is already sealed inside the line set, and the connectors click into place with hand-tightened fittings, eliminating the need to pull a vacuum or weigh in refrigerant. The included smart HVAC controller module works with Google Assistant and Amazon Alexa for voice or app control.

Real owners with no prior HVAC experience reported completing installations in a few hours by following online video guides. One reviewer installed five MRCOOL units across their house and described them as “working great.” The unit covers up to 1,050 square feet, which is slightly smaller coverage than the 24,000 BTU Hykolity or COSTWAY options because MRCOOL rates its capacity more conservatively. The indoor unit is whisper-quiet at low fan speeds, and the 5th-gen design includes a built-in condensate pump for installations where gravity drainage isn’t possible.

The trade-off for the DIY-friendly design is efficiency — the MRCOOL 5th Gen does not publish a SEER2 rating in the product data, and the annual energy consumption of 5,750 watts is higher than comparable 21 SEER2 units from COSTWAY or DELLA. This unit is best for homeowners who want to avoid the to cost of professional installation and are comfortable with basic hand tools. For anyone who can handle the install, the upfront savings often offset the higher long-term energy consumption over several years.

Check Price on Amazon

The Senville 3 Ton central heat pump system delivers 36,000 BTU of cooling and heating using a variable-speed scroll compressor — a genuine inverter-driven unit that modulates from roughly 20 percent to full capacity. At 16 SEER2, it’s not the highest efficiency rating, but the variable-speed operation itself provides significant energy savings because the unit runs longer at lower speeds rather than cycling on and off. It covers up to 2,000 square feet and operates in heating mode down to -22°F, making it one of the few central heat pumps capable of primary heating in cold climates.

Real owners report the system is “very quiet” and “keeps my entire house cool” even during 100°F outdoor conditions. One user noted a 1,700 kWh reduction in the first month after replacing an older system. The variable-speed indoor fan never fully cycles off in heat mode, maintaining continuous air circulation and more even temperatures. However, the installation requires two 230V power services plus S1/S2 and HA/HB communication wires, which most HVAC techs will understand but which adds complexity. One negative review cited a PC 04 error code after three months, and the user was unable to get support — a risk with any direct-to-consumer central system.

This unit is best for homeowners with existing ductwork who want to convert from a traditional single-stage air conditioner or furnace to a variable-speed heat pump without replacing the entire duct system. The 10-year compressor warranty and 5-year parts warranty provide solid coverage, but the manuals are notably poor, even by HVAC industry standards. Budget extra labor time for the installer to figure out the wiring.

Check Price on Amazon

The Goodman GPH1442H41 is a package heat pump — all components (compressor, condenser, evaporator, and air handler) are housed in a single outdoor unit, making it ideal for ground-level slab installation where indoor space is limited. At 42,000 BTU (3.5 tons) and 14 SEER, it provides strong capacity for homes up to 2,400 square feet. The R-410A refrigerant is being phased out in favor of R-32, but the unit is serviceable with widely available parts and every HVAC tech knows how to work on it.

Real owners are overwhelmingly positive, with one user noting “this is my third Goodman in 41 years and the first two are still running in my barn and woodworking shop.” Another replaced a 15-year-old 2.0-ton unit with this 3.5-ton and completed the installation in four hours. The package design simplifies installation because there are no line sets to run between indoor and outdoor components — just the duct connections and electrical supply. One reviewer noted the unit arrived with a missing panel, but the seller quickly sent a replacement.

The 14 SEER rating is low by modern standards — you will pay noticeably more in monthly operating costs compared to a 16+ SEER split system. But the installation simplicity and Goodman’s proven reliability make this a compelling choice for a mobile home, workshop, or rental property where upfront installation cost matters more than long-term efficiency. The unit weighs 400 pounds, so you will need help positioning it on the slab.

Check Price on Amazon

The Albott 24,000 BTU mini split is built around a self-cleaning function that repeatedly heats the indoor coil to 135°F to kill mold, bacteria, and dust mites — a feature typically found on units costing twice as much. With an 18 SEER2 rating and an annual energy consumption of 1,450 kWh, it’s one of the more efficient units in its price range. The inverter compressor handles extreme conditions from 5°F to 122°F, covering up to 1,550 square feet. The Wi-Fi control works through the manufacturer’s app and supports scheduling and temperature adjustments.

Real owners report “exceeded expectations” and note the unit is “very quiet, easy to install” for those with mechanical skills. One user in 82°F+ weather said the unit “cools whole house to 68°F” after a two-hour install plus one hour of vacuum. The self-cleaning function is appreciated by owners in humid climates who previously had to manually clean indoor coils. The 5-year compressor warranty and 7-year parts warranty are stronger than most budget-market offerings.

The trade-off is that the Wi-Fi setup requires a 2.4 GHz network, and some owners had trouble connecting initially. The included mesh filter is washable, but there is no advanced air purification like Daikin’s Titanium Apatite filter. This unit is ideal for a sunroom, garage, or home addition where mold resistance is a priority and the budget doesn’t stretch to a premium brand. The left-side installation access is tighter than the right, so plan your indoor unit placement accordingly.

Check Price on Amazon

The YITAHOME 24,000 BTU mini split delivers a 20 SEER2 rating and compatibility with Alexa and Google Home at a price point that undercuts most competitors by 20 to 30 percent. It covers up to 1,500 square feet and operates across a wide temperature range from 5°F to 118°F. The 7-in-1 system includes auto, cool, heat, dry, sleep, ECO, and fan modes, plus a “HEALTH” mode that claims to use negative ions for electrostatic dust removal and PM2.5 reduction.

Real owners report excellent cooling performance in 100°F+ conditions, with one user saying the ECO mode “maintains temp efficiently and quietly.” Another owner installed the unit in a 500-square-foot room and described it as “whisper-quiet and energy-efficient.” However, the product data includes one verified 1-star review where the unit stopped blowing cold air after two days, and a replacement unit also failed — a concerning failure rate that suggests quality control issues. Multiple reviewers emphasized that the line set must be bled with a vacuum pump and manifold gauge, which is not mentioned prominently in the instructions.

This unit is best for a garage, workshop, or vacation property where the cost savings outweigh the higher risk of early failure. The Wi-Fi setup instructions are poor and the app connection can be frustrating, but once connected, the system works reliably. Buy from a retailer with a strong return policy, and be prepared to deal with potential sensor or compressor issues within the first 90 days. At this price, you are trading long-term reliability for immediate savings.

Check Price on Amazon

The Hykolity 24,000 BTU mini split is the lowest-priced 2-ton inverter heat pump in this guide, with a 19 SEER2 rating and full Wi-Fi control through the manufacturer’s app. It covers up to 1,500 square feet and includes a comprehensive installation kit with a 16-foot L-line set, vibration absorber feet for the condenser, and a wireless remote. The unit is ETL Listed and AHRI Certified, and it uses variable frequency technology to modulate compressor speed for up to 30 percent energy savings compared to on-off systems.

Real owners are overwhelmingly positive, with one user noting “at this price point, 7 years would be an acceptable lifespan” — a pragmatic take from someone who installed the unit in a 20’x35′ room and saw 15-minute cool-down times. Another owner in Texas reported cooling a 750-square-foot metal shop to 70°F in 105°F+ heat with “negligible electric bill impact.” The whisper-quiet operation is consistently praised across reviews. One buyer hired an electrician for the 230V connection but completed the rest of the install using a YouTube guide.

The Hykolity lacks some polish: there is no current temperature display on the indoor unit (only the set temperature), and the app remote control has had intermittent issues for some users. The 3-year warranty is shorter than the 5- or 7-year warranties on the Albott or COSTWAY units, reflecting the lower price tier. This unit is best for a budget-conscious buyer who needs reliable cooling and heating in a garage, rental unit, or secondary living space and is comfortable with a DIY install approach. It offers the best value-per-BTU in this list.